SKU: 67521797663

2021-2025 F-150 CDCV Front and Rear Lift Kit (ICOK93144L)

$3525.30 $3917.00
Save 10%
No.2 Bestseller on pluriversity.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

2021-2025 F-150 CDCV Front and Rear Lift Kit (ICOK93144L)Level up your 2021 2025 F 150 with this complete ICON suspension system. 3. 5 4. 5" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together springs, shocks, and hardware designed as a complete package. Features High strength ductile iron steering knuckles replicate F 150 Tremor suspension geometry Adjustable coilovers offer 3. 5 4. 5" of front lift height over stock 2. 5

Level up your 2021-2025 F-150 with this complete ICON suspension system. 3.5-4.5" of lift gets you the clearance for bigger tires without killing your ride quality. Everything in this kit is tuned to work together — springs, shocks, and hardware designed as a complete package.

Features
  • High strength ductile iron steering knuckles replicate F-150 Tremor suspension geometry
  • Adjustable coilovers offer 3.5-4.5" of front lift height over stock
  • 2.5 Series front coilovers with remote reservoirs for improved shock cooling
  • Billet Upper Control Arms with Delta Joint Pro ball joints for added strength, durability, and alignment spec range with on-vehicle adjustability
  • 20% increase in front wheel travel and improved ride quality over stock with no change in towing capacity
  • Vehicle specific tuned front and rear shocks for superior damping and vehicle control
  • All shock absorbers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard
  • Corrosion resistant CAD plated coilover shock bodies with 7/8" shafts
  • FK rod end bearings for extended longevity and minimal deflection
  • High strength alloy CNC machined lower bar pin
  • 2.5 Aluminum Series piggyback reservoir rear shocks with 7/8" hardened chromed steel shafts
  • 6061 Aircraft grade aluminum CNC machined components
Wheel & Tire Recommendations
  • ICON Alloys - 17x8.5" w/ 5" Backspace / 6mm Offset
  • ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
  • ICON Alloys - 20x9" w/ 5.625" Backspace / 16mm Offset
  • Tires: 34" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
Important Notes
  • Only fits 4WD models
  • Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle
  • Will Not Work With Factory Installed Electronically Controlled Suspension
  • Equipped With Dynamic Bending Headlamps Purchase Part# 611071
  • ICON Delta Joint Pro Upper Control Arms Required
  • Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
  • If equipped with Dynamic Bending Headlamps and/or OnBoard Scales part # 611081 is also required
  • Will not fit F-150 Raptor
  • Not compatible with models equipped with OnBoard Scales
  • Rear springs can be configured to provide 1.5"-3.5" of rear lift or to tune ride height to compensate for added static weight in rear of vehicle
  • Models equipped with PowerBoost hybrid engines will have front lift height range of 3.25-4.25" over stock
  • Models equipped with Power-Stroke diesel engines will have front lift height range of 3-4" over stock
Manufacturer Description

ICON Vehicle Dynamics 2021-2025 Ford F-150 4WD suspension systems are designed with maximum performance and the serious driver in mind. ICON's primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality. To achieve this, these systems include high-strength CNC machined ductile iron steering knuckles that replicate the suspension geometry of the F-150 Tremor and are effectively a Tremor “conversion" for your F-150 4WD. This Stage 4 system includes vehicle-specific tuned 2.5" coilover shocks featuring CDCV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel" through the range of travel. These coilovers are adjustable for 3.5-4.5" of front lift, allowing the use of larger, more aggressive wheel and tire combos. Their combination with the ICON steering knuckles also allows for a 20% increase in wheel travel compared to other ICON F-150 kits. Billet aluminum Delta Joint PRO upper control arms not only add strength and durability but help retain factory alignment specs, offer on-vehicle caster/camber adjustment, and allow for the extra lift height this system provides. ICON 2.5 Aluminum Series CDCV piggyback reservoir rear shocks utilize vehicle-specific valving and offer increased damping and heat dissipation, balancing the performance of the truck from front to rear. The included ICON CDC Valves are externally adjustable valves that restrict oil flow into the reservoir which creates 10 levels of compression damping force ranges. ICON Multi-Rate Leaf Springs allow rear spring rate and ride height customization, improve ride quality, and reduce axle wrap by eliminating the factory rear blocks. Rear ride height is kept within an acceptable range using the ICON billet aluminum 1" lowering shackles. The ICON 2021-2025 F-150 4WD Stage 4 suspension system is an excellent choice for those looking to enhance the capabilities of their pickup. This system features upper control arms with ICON's patented Delta Joint PRO. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected, and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal. MULTI-RATE INFO (with ICON Billet Shackles): Option #1 (as shipped) +1.50" rear lift height over stock (unloaded) Option #2 +20% spring rate over Option #1 +2.75" rear lift height over stock (unloaded) +1.50" rear lift height over stock w/ 400lb constant load Option #3 +40% spring rate over option #1 +3.50" rear lift height over stock (unloaded) +1.00" rear lift height over stock w/ 850lb constant load

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 67521797663

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 847 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
John Hall
Bozeman, US
★★★★★ 5
Elegant! 👍👍
I didnt just want a WDT tool. They basically all do the same job. I wanted something that was elegant and beautiful to look at. This is it! No plastic here. The base is solid metal and thick heavy at the bottom so as to not get knocked over. Top is a real nice smooth wood.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2026
K
Verified Purchase
Kindle Customer
Omaha, US
★★★★★ 5
Wonderful WDT
I was not convinced this WDT would make much of a difference but it does. It is easy to declump espresso clumps. It is nice having the clever stand to store it in.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 25, 2026
M
midNight noctOwl
Chelsea, US
★★★★★ 5
Looks great - Heavy base - Solid beautiful walnut handle - Replacement wires
This is a really nice looking wire distribution tool for espresso portafilter baskets. The base is a very handsome shaped solid aluminum that has a good amount of heft to it, so it won't easily get knocked over. And it's perfectly aligned with the ascetics of the solid walnut handle that makes this look great. The walnut handle, from what you can see in the photos, is made from about 7 to 8 laminated pieces of walnut; it's not just an end cap or veneer. It may not be a single piece of walnut, but it would be dimensionally stable and less prone to crack over time.. This distribution tool has 7 stainless steel needles that helps to break up clumps (see photos). I found it done a pretty great job but for the sake of preventing a mess, I found it was easier to stab the grinds from the top, and then produce a small tight circle, which I repeated a few times. I felt that if I were to just stir the fine grinds in big circles, it would have knocked a lot of them out of the basket. I'm sure with more usage, I would perfect the technique with far less mess. I later realized later that a dosing funnel would actually be very useful in preventing any mess and it would help keep the grinds in place (see comments below). This set comes with an additional 7 needles, but as you can see in the photos, I left them in the packaging and did not get them out. I was curious how they were held in place in the handle, so foolishly I tried to remove the plug with my fingers and they slipped and I wound up pinching the needles. This happened before I took the photos, which explains why they are not perfectly straight and parallel to each other. I found this to be somewhat disappointing because they looked really awesome how perfectly aligned they were before I bent a few of them trying to remove the base. My point of this warning is that the needles do bend if forced, so be careful with them. That is why I did not want to remove the replacements. To be clear, these are stainless steel needles that have a great deal of flexibility to them, and they do not easily bend, but they are also difficult to get perfectly straight again. My error was that when I was trying to remove the base, the pinching grip I was using bent a few of the needles when my fingers slipped off the base. The base of the handle, in which needles are set, is friction set in to the handle. I was not able to remove it by using my fingers since it is that well secured. It looks and feels like aluminum which matches the base. My suggestion on removal of the plug, is to use pliers that are wrapped with a generous layer of tape to protect the finish of the aluminum plug. Overall, I think this is a really attractive set. The handle really looks warm and rich in the natural tones and grains of the walnut. It is perfectly paired with a strikingly handsome aluminum base that has a good amount of weight to it so it won't easily fall over if slightly brushed. The needles do retain a residue of grinds, as you can see in my photos, but it's not much. But the base, being hollow allows them to fall through to the counter top so they won't collect in blind hole. The hollow design of the base also allows it to be easily cleaned too. The needles are nice and long, and effective, but I foolishly bent a few on accident and I ruined the charm of how they looked when they were all perfectly parallel to each other. I'm on the fence as to if this really makes a better espresso. It does eliminate lumps and evens out the grinds as it's designed to do. I usually use 14.0 grams of grinds in my portafilter, but to prevent a mess with stirring the grinds with this tool, I went with 11.1 grams, which was not enough to build up any pressure in my espresso machine. I realize with more use, I will get better and more comfortable with increasing the amount of grinds. I also just noticed that I could really benefit from using a dosing funnel while using this needle distribution tool, and would eliminate most of the mess. Coffee is always a fun adventure, and with this tool set, I've opened a new door to explore, but I think I really need a dosing funnel to do this one better. I love the way this looks, and it really fits in with almost any setup with it's design, shape, and colors. This would be an excellent gift for any espresso lover out there, even someone who may not be so fanatical with the process. If you are thinking about gifting this to someone special, and you also happen to know what size their portafilter is (the diameter), then I strongly suggest getting a dosing funnel too so their first use is far more successful and pleasant than what mine was. The better their first impression may be, the more likely they will fall in love with this and want to keep exploring the possibilities.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2025
K
Kimberly
Dallas, US
★★★★★ 5
Beautiful and functional
This is the first espresso distribution tool I've ever used, so I wasn't sure if it would really make a difference. I haven't had a home espresso machine for 15+ years, so I figured now that I am home more, I'd get all the accessories to do it right. This is a beautiful piece that is very functional. It's simple to use to even out the grounds to provide for a more even flow of water through the coffee. Since I got this and used it from my very first espresso, I actually didn't test doing it without this tool to see if it made a noticeable difference. Because I've never used one before, I'm not sure what features to compare to others, so I don't know if the current $24.99 is good or not. It seems high for such a simple product, and I probably would never consider getting it if I hadn't been given the opportunity to get one through the Amazon Vine program. But as part of my new espresso routine, I do think it contributes to making a delicious cup of coffee. It certainly can't hurt and is part of my regular ritual now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 17, 2026
F
Verified Purchase
Fernando F.
Lake Worth, US
★★★★★ 5
Precision at Its Finest for Espresso Enthusiasts
Color: Black, Color: Black
As a passionate home barista, I recently incorporated the WDT Espresso Distribution Tool into my espresso routine, and I am absolutely thrilled with the results. This tool is a game-changer, providing unparalleled precision in coffee distribution. Here's why it deserves a solid 5-star review: Pros: Seven Needle Design: The 0.35mm seven needles of the WDT tool are ingeniously crafted, ensuring uniform distribution of coffee grounds in the portafilter. This results in a more consistent and even extraction, elevating the quality of each shot. Eliminates Clumping: One of the standout features is its ability to eliminate clumping effectively. The fine needles effortlessly break up any clumps in the coffee grounds, guaranteeing a smooth and even bed for tamping. User-Friendly: The WDT tool is incredibly easy to use. The ergonomic design allows for a comfortable grip, and the needles move smoothly through the coffee grounds. It has become an essential part of my pre-brew routine, taking only seconds to create a uniform coffee bed. Sturdy Build: The build quality is top-notch. The stainless steel construction not only gives the tool a premium feel but also ensures durability. It's a tool that feels like it's built to last, making it a worthwhile investment for any espresso enthusiast. Enhanced Espresso Flavor: The consistent distribution achieved with the WDT tool translates to a more balanced and flavorful espresso. The precision it offers has noticeably improved the taste profile of my shots. Easy to Clean: Cleaning the WDT tool is a breeze. The design minimizes any grounds getting stuck, and a quick rinse under water is all it takes to keep it ready for the next use. In summary, the WDT Espresso Distribution Tool has exceeded my expectations in every aspect. Its thoughtful design, impeccable construction, and the positive impact on espresso quality make it a must-have for any serious home barista. If you're looking to take your espresso game to the next level, the WDT tool is an excellent investment that delivers consistent and exceptional results. A solid 5-star recommendation from a satisfied coffee enthusiast!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 18, 2024

recommand products

Third Grade Supply List
69.82
Kindergarten Supply List
51.80
Ms. Feller's Intensive Reading Supply List
29.20
Fourth Grade Supply List
176.38
Cat Portrait WX1801005CL Quilt
79.95